AMRL-001 Series Solid state laser for atmospheric particulate matter lidar

Your Position: Home » Products » AMRL-001 Series Solid state laser for atmospheric particulate matter lidar
AMRL-001 Series Solid state laser for atmospheric particulate matter lidar

AMRL-001 series is a high frequency nanosecond all solid state laser. These lasers have high peak power, repetition rate over KHz, and pulse width of about 10ns.

Optical design with end pump + acoustooptic Q-switch. Full air cooling design can meet the complex working conditions at wide temperature. Structural stability and reliability, after a long period of customer validation, can achieve 7 × 24 hours of trouble-free operation.

Typical applications are the matching light sources for atmospheric particulate matter lidar. Used for real-time monitoring of atmospheric environment changes. Backscattered light is produced by the interaction of a pulsed laser with particulate matter in the atmosphere. The scattered signal is received by the telescope system and passed through the photoelectric detection system and the signal acquisition system. The spatial distribution of extinction coefficient and depolarization coefficient of atmospheric particulates is then inverted by computer. This enables the detection of atmospheric quality.

 

Features Application
  •  Compact structure and high compatibility
  •  Wide temperature, working temperature -10~60℃
  • Good beam quality and directional stability
  • Adaptive parameter control
  • High level of protection, anti-vibration design
  • Industrial grade 7*24 hour design
  • Atmospheric Particle Detection
  • Laser ranging
  • 3-D Imaging, Remote Sensing

UL-500μJ-5KHz-AMRL001 parameters

ParameterData
ModelUL-500μJ-5KHz-AMRL001
Energy@1064nm≥500μJ@25℃
Energy@532nma≥500μJ@25℃
Average output power2.5 W @ 5 KHz
Power stability≤ 2 % @ 25℃ @ 8h
Pulse width<15ns, Type.13ns
Beam quality M2<1.3
Repetition frequency3-7KHz Adjustable Default 5KHz
Full angle of beam divergence<3mrad <150μrad @ Full angle @ Beam expansion ×15
Spot diameter<600μm
Polarization ratio>100:1
Beam directivity≤50μrad @ 25℃
Synchronous output signal3.3V~5V @ 50Ω TTL signal,Width≥1μs,Rising edge≤50ns,Jitter<2ns
Communication interface4PM terminal ,RS232 communication protocol
Cooling modeTEC refrigeration, radiator and fan
Power supply24V DC
Laser Head Sizeb250mm×240mm×105mm
Power wastecNormal temperature:90W;
High temperature:200W
Total weight7Kg
Laser lifetime> 8500h
Working temperatured-10~+60℃
Storage temperature-20~+70℃
Relative humidity0~80%
a. The output index and shape of 1064nm and 532nm lasers are the same, and they are two lasers of the same model.
b. This laser is convenient for customers. Except for the four laser modules (laser head module, LD pump source module, Q-switch module and circuit control module), it cannot be changed. The layout of other parts of the laser can be adjusted according to customer requirements.
c. The laser cooling fan is adaptive. The power consumption of low-speed operation at room temperature is about 90W, and that of high-speed operation at high temperature is about 200W.
d. Under high temperature, the laser can work normally, but the output energy will be reduced.

If you are intereted in AMRL-001 Series Solid state laser for atmospheric particulate matter lidar, please click the button below to enquire or ask for a samplel.

Related article(s) with AMRL-001 Series Solid state laser for atmospheric particulate matter lidar:

There is no related article with this product, please visit our articles page to find out more.

Related case study with AMRL-001 Series Solid state laser for atmospheric particulate matter lidar:

There is no related case study with this product, please visit case study page to find out more.

Related solution(s) with AMRL-001 Series Solid state laser for atmospheric particulate matter lidar:

Related video(s) with AMRL-001 Series Solid state laser for atmospheric particulate matter lidar:

There is no related video(s), please visitvideos page to find out more.

Scroll to Top